EFI VUTEk GS Pro-TF Series

How to Buy

Direct digital UV imaging for deep-draw thermoforming

Produce custom-formed signs, packaging, POP displays, vending panels and other thermoforming applications faster and more efficiently by imaging direct to substrate with an EFI™ VUTEk^® GS Pro-TF series digital inkjet printer. With outstanding elongation characteristics, excellent adhesion and consistent post-draw opacity, images printed on two- or 3.2-metre VUTEk® GS Pro-TF series printer with UV ink engineered specifically for thermoforming withstand heat forming and cutting/routing with no chipping or loss of adhesion.

EFI VUTEk GS Pro-TF Series

Media/Handling

VUTEk GS2000 Pro-TF handles rigid and sheeted media up to 80 in. (203.2 cm) wide and up to 2 in. (5.08 cm) thick
VUTEk GS3250 Pro-TF handles rigid and sheeted media up to 126.5 in. (321.3 cm) wide and up to 2 in. (5.08 cm) thick
Optional Extension Table with casters
Optional Small Depth Extension Table for use with small boards/ panels and multiple fence stops

Productivity
VUTEk GS2000 Pro-TF:

Sellable, Fast-4 quality output at up to 32 – 4’ x 8’ (1.2m x 2.4m) boards per hour
Extended gamut eight-colour productivity at up to 16 – 4’ x 8’ (1.2m x 2.4m) boards per hour
Optional continuous board-to-board capabilities up to 41 – 4’ x 8’ (1.2m x 2.4m) boards per hour

VUTEk GS3250 Pro-TF:

Sellable, Fast-4 quality output at up to 44 – 4’ x 8’ (1.2m x 2.4m) boards per hour
Extended gamut eight-colour productivity at up to 22 – 4’ x 8’ (1.2m x 2.4m) boards per hour
Optional continuous board-to-board capabilities up to 55 – 4’ x 8’ (1.2m x 2.4m) boards per hour

Environmental considerations

Compressed Air: 95–150 psi maximum at 4 cf/m—dry air only (not included)
Temperature: 68° F to 86° F (20° C to 30° C)
Humidity: 30% to 80% (noncondensing)
Electrical: 3 phase, 60 amps (4 wire Delta or 5 wire Y), 200-240 VAC, 50/60 Hz

VUTEk GS-TF thermoforming ink

Extreme elongation for draw depth, (deep draw application)
Superb water / moisture resistance
Flexible for multi layer applications/die-cutting
Elevated colour strength for backlit applications
Supplied in 5.0-litre containers
Available in cyan, magenta, yellow, black, light cyan, light magenta, light yellow, light black and white

Enhanced Service Programme (ESP)

EFI’s industry-leading service and support programme for your printer, Fiery proServer hardware and Fiery XF software
Thirteen months of Essential coverage, with 24-business-hour (three-business-day) response
Eligible for upgrade to:
Critical: Providing eight-business-hour (one-business-day) response
ProActive: Providing 16-business-hour (two-business-day) response

Fiery digital front end

EFI Fiery® proServer Premium