Free your Design

There’s a reason we call this superwide roll-to-roll printer the D5r.
That’s because everything about the EFI VUTEk D Series is designed to support your designs. In fact, they’re the most advanced mid-range roll-to-roll printers on the market—created especially for the industrial printing demands of high-quality, volume producers like you.
Do you have design plans on a new roll-to-roll printer for your shop? 
Then go for the new the EFI VUTEk D5r. Better by design. Better for design.




Printing technology

  • Piezo drop-on-demand inkjet technology
  • Print heads with inherent 7 pL drop size
  • Up to 1200 dpi true resolution
  • Colors: C, M, Y, K. Optional white and clear ink

  • Handles a wide variety of flexible substrates up to 520 cm max printing width
  • Roll-to-roll, free-fall, and multi-roll (3 rolls of 1.6 m)
  • 300% better media utilisation — only 40 cm is wasted on each roll loading
  • Optional Super Duty Winder enables working with large media rolls up to 750 kg* for continuous, unattended work
  • Optional Motorised Winders for precise media collection

Quoted maximum roll weights may vary significantly based on media type and width

  • Production: up to 285 m2 per hour
  • Quick and easy media loading

Genuine EFI Inks

  • EFI - 3M™ SuperRange XF Inks
    • Environmentally friendly, LED-curable UV inks
    • Small dot gain and wide color gamut
    • Superb durability
  • EFI SuperFlex Inks for car wrapping and fleet graphics

Clear Protective Coating
  • Printed inline, simultaneously with the image
  • Full flood or selective
  • Glossy or matte finish with same ink
  • Provides 3-years outdoor protection against:
    • Abrasion and scratching
    • Chemicals, such as detergents, gasoline, and IPA
    • Weather damage
    • Air pollution
    • UV fading/yellowing
  • Saves time compared to separate offline coating systems
Environmental considerations
  • Compressed air: 6.5 bar, airflow of 110 litres/min, dry and clean air only (not included) 
  • Operating temperature: 20 ˚C to 30 ˚C
  • Humidity:
    - Standard range: 30% - 80% (non condensing)
    - Optimal range: 50% - 80% (non condensing)
  • Machine weight: 5,900 kg; crated — 6,400 kg
  • Height: 210 cm
  • Width: 820 cm
  • Depth: 135 cm
  • Electrical: 230/380 VAC 3 Phase +N + PE 32 Amp 50/60 Hz
    - Printing consumption: 1.8 kW, Peak consumption: 5.7 kW
  • Chiller: Cooling capacity 4.6 kW – required for LED UV curing (included)

Fiery digital front end
  • Built-in Fiery® SE for VUTEk D5r
  • Other RIP solutions are supported