EFI Nozomi 18000+ LED

How to Buy

Satisfy your need for speed in a single pass

The EFI™️ Nozomi 18000+ LED is the single best printer to accelerate your business with the ability to run an impressive variety of substrates along with enhanced priming and print varnish capabilities.

EFI Nozomi 18000+ LED

Overview
Specifications
Support

Printing
Technology	EFI single-pass, drop-on-demand digital inkjet
Maximum printing area	1800 mm wide x 3200 mm long
Resolution	360-720 dpi with 4 greyscale levels
Number of colours	Up to 7 colours with optional White, Orange, Violet
Ink type	Genuine EFI UV LED inks
Primer	Enhanced primer included Optional over print varnish application
Digital front end	EFI Fiery NZ-1000 “blade” continuous feed system
Productivity (1.2 x 2.4 m boards)
Single line printing	65 linear m/min
Manual feed	600+ boards/hour *
Full pallet-to-pallet automation	1,000+ boards/hour
* Manual throughput dependent on operator loading time
Media handling
Maximum print width	1800 mm
Media thickness	From 0.30 mm to 12.7 mm
Stacking	Not available for substrates less than 0.8 mm thick
Automation	¾ automation or pallet to pallet
Environmental considerations
Footprint (LxWxH): Scissor lift table, UV primer, registration module, configurable printer, optional UV varnish, stacker	36.5 m x 11.28 m x 3 m
Temperature inside cabin	23 - 28 °C
Relative humidity	20-80% non-condensing
Electrical	350A at 380V or 280A at 480V supply
Air	Clean and dry air, 6.5 bar

* Manual throughput dependent on operator loading time