EFI VUTEk D3r

How to Buy

Free your Design

There’s a reason we call this superwide roll-to-roll printer the D3r. That’s because everything about the EFI VUTEk D Series is designed to support your designs. In fact, they’re the most advanced mid-range roll-to-roll printers on the market—created especially for the industrial printing demands of high-quality, volume producers like you.

Do you have design plans on a new roll-to-roll printer for your shop? Then go for the new EFI VUTEk D3r.

Better by design. Better for design.

Printing technology

Piezo drop-on-demand inkjet technology
Print heads with inherent 7 pL drop size
Up to 1200 dpi true resolution
Colors: C, M, Y, K. optional white and clear ink

Media/Handling

Handles a wide variety of flexible substrates: up to 138 in (350 cm) max printing width
Roll-to-roll, free-fall, and multi-roll (2 rolls of 63 in/1.6 m)
300% better media utilization — only 15.7 in (40 cm) is wasted on each roll loading
Optional Super Duty Winder enables working with large media rolls up to 1,653 lbs (750 kg)* for continuous, unattended work
Optional Motorized Winders for precise media collection

* Quoted maximum roll weights may vary significantly based on media type and width

Productivity

Production: up to 2,196 ft² (204 m²) per hour
Quick and easy media loading
Easy loading and printing

Genuine EFI Inks

EFI - 3M™ SuperRange XF Inks
- Environmentally friendly, LED-curable UV inks
- Small dot gain and wide color gamut
- Superb durability
EFI SuperFlex Inks for car wrapping and fleet graphics

Clear Protective Coating

Printed inline, simultaneously with the image
Full flood or selective
Glossy or matte finish with same ink
Provides 3-years outdoor protection against:
- Abrasion and scratching
- Chemicals, such as detergents, gasoline, and IPA
- Weather damage
- Air pollution
- UV fading/yellowing
Saves time versus separate offline coating systems

Environmental considerations

Compressed air: 95 psi (6.5 bar) air flow of 4 cf/m (110 L/min), dry and clean air only (not included)
Operating temperature: 68 °F to 86 °F (20 °C to 30 °C)
Humidity:
- Standard range: 30% - 80% (non condensing)
- Optimal range: 50% - 80% (non condensing)
Machine weight: 9,656 lbs (4,380 kg); crated — 12,742 lbs (5,780 kg)
Height: 82 in (210 cm)
Width: 264 in (670 cm)
Depth: 53 in (135 cm)
Electrical: 230/380 VAC 3 Phase+N+PE 32 Amp 50/60 Hz
- Printing consumption: 1.8 kW, Peak consumption: 4.7 kW
Chiller: Cooling capacity 3.6 kW – required for LED UV curing (included)

Fiery digital front end

Built-in Fiery® SE for VUTEk D3r
Other RIP solutions are supported